Slotted Concrete Posts for Fence Panels

Description

Concrete Posts have many advantages over traditional timber, our slotted concrete posts are a popular choice when installing fence panels. Like all Supreme Posts, they are made from high strength concrete, reinforced for ultimate durability and long life. Easy to install and cost-effective, Strong-cast Slotted Concrete Posts are completely unaffected by moisture and rot and will add years of extra life to any panel fencing installation. The pro range is, in most cases, between 20-30% lighter than our previous range of concrete posts. The concrete posts should be fixed into the ground using either Blue Circle Postcrete or Remix. We also offer a local delivery service and if you need a trustworthy and reliable fencing contractor to undertake the work on your behalf, we can put you in touch with one or more of our highly recommended contractors, who have all been customers of ours for years and whose work and reputation is very well known to us.

Installing Fence Panels Using Concrete Posts

Installing concrete posts is a 2-person job (minimum) due to the heavy nature of the product and other variables. When installing posts make sure you first dig the hole to the appropriate depth. This is generally at least 2ft below the panel, e.g. for a 6ft panel, use an 8ft post etc. In some instances, it may be a good idea to dig 3 feet down – i.e. on soft ground or if in a windy area such as a hillside property. Once the hole is dug (it’s best to use a post hole spade for this to avoid digging the hole too wide) sit the post in the bottom of the hole and then ‘offer up’ the panel to ensure the finished height of the post and panel looks ok. Once this is checked and all ok, use Remix or blue circle postcrete to fix the post into the centre of the hole. Always check with a spirit level ALL sides of the post to ensure it is perfectly level before the mix sets hard (usually 10-15 mins). Whilst setting the post, it will need propping or holding to ensure it doesn’t move. whilst it’s setting, measure the width of the panel (often 6ft) and using a string line to ensure a straight fence (from the start to finish point of the fence) dig the next hole ready. Offer up the panel/gravel board and set the next post in the same way. To avoid splashing post mix on the panel/gravel board it can be raised off the ground temporarily with some blocks or similar object whilst applying postcrete, and then lowered down when set.